Scrolled Mini Clock This clock was cut on the scroll saw at the club's annual BBQ. It was entered into the silent auction and won by Kathy Ayers, wife of our club president.
It was cut from 1/2" Mahogany and finished with boiled linseed oil. It has a top coat of Deft semi-gloss spray lacquer.
Seam Ripper tool entered into the tool challenge. The handle was turned on the lathe and is made from Redheart. The finish is spray gloss lacquer.
9/3/2011 Click on image to see closeup.
Miniature Bird Houses were cut entirely on the scroll saw. The woods are Mahogany and Alder for the houses. Mahogany, Cherry and Walnut are used for the birds.
8/24/2011 Click on image to see closeup.
Cheese Dome and Cheese Knife with Tray All wood parts made from the same board of Mahogany. The base of the Cheese Board was cut on the scroll saw. The knife handle was turned on the lathe. The knife tray was cut on the scroll saw. The finish on all wood pieces is a 50/50 mixture of boiled linseed oil and mineral spirits, then top coated with Deft semi-gloss spray lacquer.
7/9/2011 Click on image to see closeup.
A Plaque to hang in Dan's shop. It is cut from Cherry and Maple. The finish is Boiled Linseed Oil with a top coat of semi-gloss spray lacquer.
5/6/2011 Click on image to see closeup.
Italian Fretwork Clock cut by Dan from 1/4" Cherry with 1/8" Maple accent. The finish is a 50/50 mix of boiled linseed oil with a top coat of Deft semi gloss spray lacquer. The pattern is by John A. Nelson from the summer 2009 issue of ScrollSaw Woodworking & Crafts.
4/8/2011 Click on image to see closeup.
Gentleman's Box By Dan Gallo
This scroll sawn box is made from Spanish cedar. The finish is a 50/50 mixture of boiled linseed oil and mineral spirits. The topcoat is Deft semi gloss spray lacquer.
The inside bottom is flocked with wine colored flocking.
The pattern is by John A. Nelson.
3/5/2011 Click on image to see closeup.
Dan made this America the Beautiful patriotic plaque from Mahogany using his scroll saw. The finish is boiled linseed oil with a topcoat of Deft semi gloss spray lacquer.
7/2/2010 Click on image to see closeup.
The scroll saw Valentine was made from Aspen and Padauk. Finish is boiled linseed oil with a top coat of Deft semi-gloss spray lacquer.
2/5/2010 Click on image to see closeup.
Bent Wood Clock, well, not actually bent, it was cut this way with a scroll saw. It is made from Mahogany and finished with boiled linseed oil and Deft spray lacquer.
9/4/2009 Click on image to see closeup.
A Walnut Pepper Grinder made from Walnut Arlen Wood and finished with Lacquer and Wax.
7/3/2009 Click on image to see closeup.
Dan build this Marble Lifting Machine project from Red Oak and Mahogany. It is finished in boiled linseed oil.
5/8/2009 Click on image to see closeup.
Dan made the handles for these two Screw Drivers. They are turned from solid Cherry and finished in Friction Polish.
1/9/2009 Click on image to see closeup.
This Rolling Grasshopper is made from Mahogany and Walnut. It is finished in boiled linseed oil.
9/5/2008 Click on image to see closeup.
This Block Plane was made from Padauk, Maple, Brass rod and a Hock blade.
1/4/2008 Click on image to see closeup.
Table Saw Alignment Tool by Dan is made from Walnut, Red Oak, Padauk and King Wood. The tools is used to align the blade parallel to the miter slot. Also used to align the rip fence parallel to the blade.
1/4/2008 Click on image to see closeup.
This Scroll Saw Box was made from Mahogany and Red Oak.
11/2/2007 Click on image to see closeup.
Cube in a Cube. How is it done? Hint: large Forstner Bit!
Marble Coordination Game. Wood: Red Oak, Cherry, Mahogany, and Baltic Birch Plywood. Finish: Watco Danish Oil and topped with Deft Satin spray Lacquer.
Pencil in a Board. How is this done? There are no cut or glue lines and no glue is used.
8/3/2007 Click on image to see closeup.
Dan made this Turned Travel Mug from assembled blank staves. The wood is Mahogany and the finish is Watco Danish Oil.
6/9/2007 Click on image to see closeup.
Regal Eagle intarsia from a pattern by Judy Gale Roberts in Wood Magazine issue #171. The woods are Walnut, Aspen, and Yellowheart. The finish is Watco Danish Oil, medium dark and Watco original Danish Oil with a top coat of Deft semi-gloss spray lacquer.
3/1/2007 Click on image to see closeup.
This Steak Knife Set was made by Dan for the "Table Setting Challenge." It is a set of six knives in a Walnut box. The knives are scaled with Cocobolo and finished with Watco Danish Oil and buffed with carnauba wax. The box is finished with wax.
2/2/2007 Click on image to see closeup.
Dan's first contribution tonight is this Butterfly Motif Trivet made from Mahogany and finished with Watco Danish Oil and Deft Spray Lacquer. The second item is a Weather Station constructed also of Mahogany and finished in Watco Danish Oil and Deft Spray Lacquer.
11/4/2005 Click on image to see closeup.
Inside Santa's Workshop sawn by Dan Gallo. The silhouette is 1/8" Baltic Birch finished with Watco Danish Oil. The Frame is 3/4" Pine finished with Acrylic Paints. The topcoat is Deft Lacquer Spray. From a pattern by Dirk Boelman in Creative Woodworks & Crafts, holiday issue, 2004. Click on image to see closeup.
12/4/2004 Click on image to see closeup.
This Queen Ann Clock made by Dan from 1/4" solid Maple and 1/8" Mahogany. It is finished in Watco Danish Oil and coated with Deft gloss spray lacquer.
6/3/2005 Click on image for closeup.
Dan made this Scroller's Shop Clock from Baltic Birch plywood. The dial is Walnut, the back is Luan plywood. The finish is Watco Danish oil and Deft Spray.
11/4/2004 Click on image for closeup.
This is Cody's Dragon Pendulum Clock made of 1/2" oak with a base of Philippine mahogany. It is finished in Watco Danish oil and Deft spray lacquer.
8/6/2004 Click on image for closeup.
Scroll Saw Clock This wonderful clock is made from solid maple and finished in Watco Oil Deft Satin.
7/2/2004 Click on image for closeup.
Rooster Plaque is made from Maple and Padauk and finished in Watco Danish Oil and Deft spray lacquer. Note the image is Dan's namesake in Spanish.
9/2/2004 Click on image to see closeup.
Dan made this latest in his dragon collection from Padauk. Top shelf is Wenge and is finished with Watco Danish oil and Deft satin spray lacquer.
5/6/2004 Click on image to see closeup.
US States Quarter Map
Dan made this USA Quarters Map Display from maple, oak, and oak plywood. The map and the states
were cut using a scroll saw.
4/1/2004 Click on image to see closeup.