Bill Watkins


Bill made this carved Spoon from cherry.
5/5/2017 Click on image to see closeup.


Bill hand carved this bowl from Butternut and finished it in lacquer.
1/5/2017 Click on image to see closeup.



3/4/2016 Click on image to see closeup.


Ladle made from Cherry and finished in Mineral Oil.
11/6/2015 Click on image to see closeup.


This Scroll Saw Bowl was made from Hickory and finished in Lacquer.
3/6/2015 Click on image to see closeup.


Segmented Scroll Saw Bowl made from Cherry, Walnut and Maple.
1/9/2015 Click on image to see closeup.


Jewelry Box made from Curly Maple and finished in Polyurethane.
7/11/2014 Click on image to see closeup.


Comic Bird House from Cedar Fencing.
3/7/2014 Click on image to see closeup.


Plate made from Cherry and finished in Polyurethane. According the Bill the pattern was 'KISS' (keep it simple)!
1/10/2014 Click on image to see closeup.


Bill says this Heron carving started as a horse... don't believe it. It is carved from Cherry and finished in Lacquer.
9/6/2013 Click on image to see closeup.


Bill made these Three Cars for the challenge
9/6/2013 Click on image to see closeup.


Bill make this Candy Dish from Cherry and finished it in Lacquer.
11/3/2012 Click on image to see closeup.


Bill make this cutting board from for the Challenge.
7/6/2012 Click on image to see closeup.


Bill carved this Bowl from Beech and finished it in Lacquer. He notes that Beech is extremely hard!
2/3/2012 Click on image to see closeup.


Bill made this Serving Tray from solid Walnut. The bear is drawn with a wood burning tool.
11/4/2011 Click on image to see closeup.


Bill carved the Boots and Hat from Walnut.
5/6/2011 Click on image to see closeup.


Bill made these two Pins from Cherry and Maple. They are finished in Polyurethane.
11/6/2010 Click on image to see closeup.


Bill made this Candy Dish from Syncamore Lacewood obtained in Ohio.
7/2/2010 Click on image to see closeup.


Candy Dish carved from Walnut in the form of a heart shaped leaf.
2/5/2010 Click on image to see closeup.


Bill shows his Jointer Push Fixture
3/6/2009 Click on image to see closeup.


A Shaker Box with his granddaughter's initials. It is made from Cherry, inlayed with Maple and finished in Oil.
3/6/2009 Click on image to see closeup.


Bill entered this carving stand made from shop scraps to avoid the carving tools cutting things they are not supposed to cut!
1/9/2009 Click on image to see closeup.


This Tray made from Ambrosia Maple. It is finished in Cellulose sanding sealer and polyurethane. It is carved using a special router bit and a guide template.
7/4/2008 Click on image to see closeup.


This Pinwheel Box was made from Cherry and finished with Oil and Wax.
6/6/2008 Click on image to see closeup.


Bill made these Bowl or Dish carvings using his router and a template. One is made from Ambrosia Maple and the other from Walnut. They are finished in Sanding Sealer and Bowl Wax.
11/2/2007 Click on image to see closeup.


This Shaker Tissue Box is made from Cherry cut from the farm in Ohio. It is finished in Carnauba wax, Beeswax, and Linseed Oil.
12/7/2006 Click on image to see closeup.

Cherry Table



Bill built this Cherry Work Table for his grand daughter. It is made mostly from solid cherry but has accents of Curly Maple and Walnut. The finish is Tung Oil on the top and Polyurethane for the rest.
7/29/2006 Click on image for closeup.

Bill made these Musical Spoons from Walnut and Poplar.
Click on image to see closeup.
4/10/2006


Bill made this Cheese Box from Curly Cherry obtained in Ohio. The finish is Tung Oil.
1/6/2006 Click on image to see closeup.


Bill made this beverage tray for his son, Dale. The rails are Walnut, and the tray is marquetry made from curly maple, walnut, ebony and other veneers. The finish is water based polyurethane.
1/15/2005 Click on image to see closeup.