Stephen is assembling an All Wood Grandfather Clock. It is made from various donated woods and is to be finished in Lacquer and Polyurethane.
11/4/2011 Click on image to see closeup.
Italian Fretwork Clock cut by Dan from 1/4" Cherry with 1/8" Maple accent. The finish is a 50/50 mix of boiled linseed oil with a top coat of Deft semi gloss spray lacquer. The pattern is by John A. Nelson from the summer 2009 issue of ScrollSaw Woodworking & Crafts.
4/8/2011 Click on image to see closeup.
Clock is Lee's beginner scroll saw project.
2/5/2010 Click on image to see closeup.
Mantle Clock made from Bocote wood from S/Central America. Finished in Tung Oil and Varnish.
12/3/2009 Click on image to see closeup.
This Craftsman Clock is made from Walnut, Oak, Pine, Poplar, Maple, Redwood, Cedar, Mrytlewood. The finish is Polyurethane.
8/8/2008 Click on image to see closeup.
This Sports Clock is a wall hanging made from Bass, Cedar, Pine, Walnut, Alder and Purple Heart. The finish is Lacquer.
9/8/2006 Click on image for closeup.
Dan built this Santa's Workshop Clock from cherry, maple, walnut, oak, pine, Baltic birch, and padauk. It has a quartz movement with Westminster chimes. Dan installed a switch to turn off the chimes when necessary. You can see Santa and his Elves through the windows and a couple Elves hanging on the pendulum! The finish is Watco Danish Oil and Deft Spray Lacquer.
Click on image to see closeup.
12/2/2005
This Queen Ann Clock made by Dan from 1/4" solid Maple and 1/8" Mahogany. It is finished in Watco Danish Oil and coated with Deft gloss spray lacquer.
6/3/2005 Click on image for closeup.
Dan made this Scroller's Shop Clock from Baltic Birch plywood. The dial is Walnut, the back is Luan plywood. The finish is Watco Danish oil and Deft Spray.
11/4/2004 Click on image for closeup.
This is Cody's Dragon Pendulum Clock made of 1/2" oak with a base of Philippine mahogany. It is finished in Watco Danish oil and Deft spray lacquer.
8/6/2004 Click on image for closeup.
Scroll Saw Clock This wonderful clock is made from solid maple and finished in Watco Oil Deft Satin.
7/2/2004 Click on image for closeup.
Bill made these two clocks from walnut.
5/6/2004 Click on image for closeup.
Dan Gallo created this Intarsia Shop Clock. The saw blade is maple; the hammer is pine and padauk; the chisel is walnut and cherry; the hand saw is mahogany, cherry and desert eucalyptus; the backer board is baltic birch and the finish is Watco Danish Oil and Deft Satin Spray Lacquer.
Click on image(s) to see closeup.
3/5/2004
Oak Wall Clock
Bill built this smart Walford oak wall clock for his daughter, Lynn, from plans obtained from the Meisel Hardware Specialties catalog, Sealed, no stain, finished with semi-gloss Varathane.
2/22/2003 Click on image for closeup.