Tim made the Bowl from an Olive tree which was pointed out by Lee Truman!
5/6/2011 Click on image to see closeup.
Tim made the Bowl from an Olive tree which was pointed out by Lee Truman!
5/6/2011 Click on image to see closeup.
The first Bowl is turned from Olive and finished by Oil and buffing. The second is from Natural Edge Mesquite and is unfinished.
5/6/2011 Click on image to see closeup.
A Plaque to hang in Dan's shop. It is cut from Cherry and Maple. The finish is Boiled Linseed Oil with a top coat of semi-gloss spray lacquer.
5/6/2011 Click on image to see closeup.
Mountain Man II carved from a Birch branch with the bark left on the back. Pipe is Basswood and the base is Mahogany. Approximately 7" tall, it is finished with Sanding Sealer and Semi-gloss Varathane.
5/6/2011 Click on image to see closeup.
The Bowl and Goblet are turned from Walnut. They are both finished in Polyurethane.
5/6/2011 Click on image to see closeup.
Chuck turned these three Bowls from Camphor. One is natural and the other are finished with EEE & Shellawax.
5/6/2011 Click on image to see closeup.
Bob carved this Penasaurus pen holder from Walnut and Olive. The finish is Polyurethane. The kids love it.
5/6/2011 Click on image to see closeup.
Mark made this Wall Cabinet from Pine in his Greg Radley class at Ventura College. It is not yet finished.
5/6/2011 Click on image to see closeup.
Dan's Flying Pig was made for the challenge
5/6/2011 Click on image to see closeup.
Bill carved the Boots and Hat from Walnut.
5/6/2011 Click on image to see closeup.